How to paint a wall yourself – Easy step by step guide

Published by Rachit on

When the walls of your house look too old and dull, and you want to paint a wall yourself by simply picking up the brush. If you are seriously considering paint a wall of your home by yourself, before doing it would be helpful to have some knowledge of painting fundamentals that can save you valuable time and effort. You must be very careful. We have just the right suggestions for you. So, if you are wondering how to paint a wall, here is our step by step instruction list for you.

Paint a wall

Choose the correct color:

Before you think about how to paint a wall yourself, you have to make your plan. If you have planned to paint a wall of your home. you probably have some home decor ideas in mind.

Think about how you can turn them into reality. What color will the house take? Will all four walls look the same, or will you have an accent wall? How do you want to see the accent wall? When it comes to choosing interior paint, you have many options available. Consider not only the color but also the desired texture and finish you want for the wall. Think about all these things before rolling up your sleeves.

The Ultimate Guide of Paint – Types of Paint, Why we should paint, Composition of paint.

Preparation before starting paint a wall:

Once you have prepared your action plan, combine all the necessary things together. From the right amount of the right home color paint to the right tools, basic tools, collect everything before you start.

Protect your room furniture, appliances, and all accessories properly, or they will have house paint spots on them. Cover them with a cloth and take them to another room so that you can paint a wall without any obstruction. Cover the floor with a drop cloth to avoid paint droplets and splatter.

Use a painter’s tape to cover everything you don’t want to paint. Protect the trim above and below the wall and around doors and windows. Cover hardware, electrical boards and switches, doorknobs, ventilation trims, molding, wall detailing, and everything else you want.

Surface preparation for paint a wall:

Undeclared surface thoroughly cleaned of dust, dirt, grease, leaving mortar, and other foreign substances and sandpapered smooth.

All unnecessary nails will be removed. The plaster of Paris mixed with a dry distemper of color used to pitting in plaster will be made good. The surface will then be smoothed by rubbing it with fine-grade sandpaper. A coat of primer will be applied on the patch. Surfaces will be allowed to dry thoroughly before a regular coat of primer.

The surface affected by molds, mosses, fungal algae lichen, efflorescence, etc. will be considered according to the manufactured. Prior to applying the primer, any unevenness would be made good by applying plaster of Paris mixed with water over the entire surface, including filling the undulation and then sandpapering the same way after drying.

Priming Coat:

Always use a primer when painting interior walls. This will not only help the paint stick, but it will also cut the number of coats you apply to achieve the same depth of color. The primer is particularly useful when a lighter color is painted over a darker color.

The primer will be applied with a brush on a clean dry and smooth surface. Horizontal strokes will be given first and vertical stokes will be applied immediately afterward. This whole process will establish one coat.

The surface shall be evenly complete with no brush results. It will be allowed to do one coat. Leaving traces without brush will even finish the surface. It will be allowed to dry for at least 5-6 hours before applying the first coat of paint.

The primer can be tinted at your local store to closely match the color of your paint. Since primer is less expensive than paint, a tinted primer can reduce your printing costs.

Preparation of the mixture:

This will be done according to the manufacturer’s instructions. Use an electric paint mixer or handheld stealer to mix the paint into asymmetry, even if it was mixed when you purchased it. This will prevent the separation of oils and pigments, resulting in better coverage and a smoother finish. Once the paint reaches a uniform texture, it will be ready to go.


Before being put into small containers for use, the paint will be shaken well in its container. When applying, the paint will be stirred continuously in small containers, so that its consistency remains uniform.

For undeclared surfaces, after the primer coat has been dried for at least 5-6 hours, the surfaces will be lightly sandpapered so that they are smooth to obtain wall paint, being careful not to rub the priming coat out. All loose particles will be dusted off after rubbing.

The paint will be applied with brushes or rollers. The best method for painting with a roller is to apply it with an “M” or “W” pattern until it is forward and backward from the same section. The surface shall be treated with at least two coats of paint. The second or subsequent coat shall not be started until the use of the preceding coat becomes sufficiently hard to resist marking by brush.

paint a wall with roller

On finishing the surface will present a flat velvety smooth finish. It will be the same and similar in shed patch, brush mark, paint drop, etc.

Depending on how deep you want the new color, you can roll on a third or fourth color coat. Most walls should not require more than a few pairs of paint. However, an additional texture may be useful for thick textured walls or for painting in darker shadows.

Allow the paint to set overnight. Interior paint usually takes 24–48 hours to fully dry. Once you are satisfied with the look of the wall, do not forget to remove the painter’s tape


Old brushes if they are to be used with emulsion paints shall be completely dried of turpentine oil paint by washing in warm soapy water. The brush should be rinsed quickly and immersed in water immediately after use during break periods to avoid the hardening of the paint.

No oil-based putty will be used in preparing the wall for plastic emulsion painting in filling in cracks, holes, etc., Splash on the floor, etc. will be cleaned without delay as they will be difficult to remove after hardening. Washing of surfaces treated with emulsion paint shall not be done within 3 to 4 weeks of application.


Now that you know how to paint a wall, you need supplies such as paint roller covers, paint trays, and more. Shop for all your home’s painting needs. If you feel that this is too much to do and you can make mistakes, then hire professional painters to turn your home into an attractive place.


Categories: On site tips


Civil Engineer


Leave a Reply